Creating Your Custom FlexaLamp Shade!

Using Fabrics 

 

Using Fabrics with FlexaLamp

Position shade OVER fabric and trim to size. If using an adhesive spray, use a light coat on the PRINTED side of the fabric, NOT the shade, and position on the SMOOTH side of the shade. Gently press into place starting at the center and spreading out to the edges.

If using transparent tape, leave a 1/4 – 1/2″ space around the fabric to allow the tape to adhere to the smooth side of the shade.

Paper/Transparencies/Photos

 

FlexaLamp with Paper and Photo Products

It’s best to use transparent tape around the perimeter edges instead of spray adhesives.

When using tape, leave a 1/4 – 1/2″ space around the edges to allow the tape to adhere to the SMOOTH side of the shade with the image side DOWN.

Decorative Films

FlexaLamp components

Decorative window films can be adhesive or static cling. Using adhesive types will be permanent unless you leave the backing on and use transparent tape around the edges.

If using adhesive types and leaving the backing on, install with the non adhesive side DOWN onto the shade and tape around the perimeter.